| Beschikbaarheid: | Op voorraad |
| Levertijd: | Standaard DPD verzending |
A fully printed VFC SCAR-H magazine top with an AEG/Shotshell magwell prefitted!
PLUG & PLAY - Comes pre-fitted with valve, feed lips and gas router - you do not need to use any donor parts. No assembly is required.
XM7 - To remain compatible with a wide range of generations of VFC 762 rifles, this adapter comes with 4 different-sized valve knockers that can be easily changed by removing the large pin on the side of the adapter. The XM7 tends to prefer knockers labelled C or D.
You can run the adapter at 120-150PSI.
We utilise a very high flow valve. This has allowed us to build a far more reliable adapter that is capable of high FPS and sustained full auto.
Our M4 base is injection moulded using a highly impact-resistant polycarbonate blend.
We recommend the use of a PTS brand magazine such as EPM-LR, EPM1RX, EPM-1, EPM1S. Many other brands of magazine will work. If a magazine does not fit, you can swap the rear shim at the back of the adapter.
US Style HPA Fitting as Standard (most common fitting across industry - compatible with all AIRTAC HPA equipment)
DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER. ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS). CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER. NEVER CONNECT OUR EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS. NEVER CONNECT OUR EQUIPMENT TO A TIPPMAN STYLE HPA LINE