| Beschikbaarheid: | Op voorraad |
| Levertijd: | Standaard DPD verzending |
DOES NOT REQUIRE A DONOR MAGAZINE, JUST PLUG AND PLAY
Wanting to use a shotgun shell with your CYMA CGS? We’ve reverse engineered & manufactured our own magazine, then put our awesome shotshell mechanism inside!
A BB latch prevents dropped BBs (0 BBs dropped when shell is empty) and simple push mag release on the bottom the adapter makes it easy to change shells.
Features:
Lightweight magazine setup without an obvious HPA adapter aesthetic
Looks like a short smaller capacity M4 mag for DMR aesthetic
BB retention mechanism to reduce BB loss during magazine changes
US style fitting as standard
This adapter allows you to run HPA on your MWS / MWS clone
Comes pre-fitted with valve, feed lips and gas router - you do not need to use any donor parts. No assembly is required.
We test each adapter in a Tokyo Marui MWS before shipping.
The gas router for this adapter is made from injection moulded rubber, to the standard CGS spec and dimensions, meaning you can use a factory or aftermarket CGS router should you wish. TM CGS feed lips are also compatible with this adapter.
We utilise a very high flow valve. This has allowed us to build a far more reliable adapter that is capable of high FPS and sustained full auto.
A rear shim is included, which can be fitted to increase air seal (due to manufacturing tolerances between various brands of 'CGS' receiver)
You will also be provided three feed tubes of different lengths. Sometimes, due to manufacturing tolerances of the shells, you may need to swap out the feed tube already pre-fitted to give the best feeding results.
Includes rear shim, one set of spare feed lips, a longer valve knocker for certain non TM MWS clones, and all screws required to fit any of our modular magwell bases. Various lengthened feed tubes are provided with the adapter, allowing you to optimise shell feed.
US Style HPA Fitting as Standard (most common fitting across industry - compatible with all AIRTAC HPA equipment)
DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER.
ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS).
CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER.
NEVER CONNECT OUR EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS.
NEVER CONNECT OUR EQUIPMENT TO A TIPPMAN STYLE HPA LINE